Labels pane

Main page

In Motive, the Labeling pane can be accessed under the View tab or by clicking Toolbar Labeling Icon.png icon on the main toolbar.

For more explanation on the labeling workflow, read through the Labeling workflow page.

Overview


LabelingPane 30.PNG
Function Icon Description
Selection Mode
Label SelectionMode 30.png
Options for switching between select mode and QuickLabel mode. Select mode is used for normal operations, and QuickLabel mode allows assigning each selected label with just one-click.
Increment Options
Label IncrementOptions 30.png
Options for selection increment behavior when labeling:
  • Do not increment: Selection stays the same after labeling
  • Go to next label: Selection advances to the next label on the list
  • Go to next unlabeled marker: Selection advances to the next unlabeled marker on the list.
Unlabel Selected
Label Unlabel 30.png
Unlabels selected trajectories.
Label List Options
Label ListOptions 30.png
Splits the list of labels into two columns for organization purposes. Unlabeled trajectories will be sorted on the right column, and the selected marker set labels are sorted on the left column.
Link to 3D Selection
Label LinkTo3D 30.png
When this button is enabled, marker label selection will be linked to the selection from the Perspective viewport.
Show Range Settings
Label RangeSettings 30.png
When enabled, shows the range settings to determine which frames of the recorded data the label will get applied to.

Marker Labels


Labeling pane includes a list of marker labels that are associated with the capture. The color of each label tells whether the marker is tracked in the current frame, and the corresponding gap percentage is indicated next to each label. When a marker set is chosen under the markerset dropdown menu, only associated labels will be listed. In addition, the marker set selection can also be linked to 3D selection in the perspective view pane when the Link to 3D button Label LinkTo3D 30.png is enabled.

Labeling Settings


Labeling Range Settings

All/Selected

Assign labels to a selected marker for all, or selected, frames in a capture.

  • Labeling entire range of a trajectory using the All/Selected setting.
  • Labeling only selected range of a trajectory using the All/Selected setting.

Spike/Fragment

Applies labels to a marker within the frame range bounded by trajectory gaps and spikes (erratic change). The Max Spike value sets the threshold for spikes which will be used to set the labeling boundary. The Max Gap size determines the tolerable gap size in a fragment, and trajectory gaps larger than this value will set the labeling boundary. This setting is efficient when correcting labeling swaps.

Max Gap

This sets the tolerable gap sizes for both gap ends of the fragment labeling.

Max Spike

Sets the max allowable velocity of a marker (mm/frame) for it to be considered as a spike.
  • A trajectory fragment bounded by gaps.
  • A trajectory fragment bounded by spikes.

Apply Labels

When using the Spike or Fragment range setting, the label will be applied until the marker trajectory is discontinued with a gap that is larger than the maximum gap defined above. When using the All or Selected range setting, the label will be applied to the entire trajectory or just the selected ranges.

Forwards

Assigns the selected label onto a marker for current frame and frames forward.

Backwards

Assigns selected label onto a marker for current frame and frames backward.

Forwards & backwards

Assigns selected label onto the marker for current frame, frames forward, and frames backward.